Oil change pump F3B-19 with reversing switch

Description

The F3B-19 oil change pump extracts the used oil from the engine and, after flipping the integrated reversing switch, pumps fresh oil back in. It is based on the F3B-19 impeller pump with bronze housing, 3/8" connections and nitrile impeller, driven by an overload-protected DC motor.

Features

• Integrated reversing switch for extracting and filling
• Self-priming nitrile impeller
• Bronze pump housing with lip seal
• DC motor with thermal overload protection
• Connections 3/8"

Application

For changing the oil of the boat engine directly on board: extract the used oil and fill fresh oil with the same pump.

Selection guide

Run the engine up to about 50 °C before changing the oil – warm oil flows better and reduces the load on the pump. The oil hose must be resistant up to 120 °C.

Safety note

Switch the pump off immediately once the oil has been extracted or the refill container is empty – dry running damages the impeller and seals. Do not use for petrol or solvents.